Removing An Existing Drive - Gateway DX4320 Hardware Installation Manual

Removing an
Existing Drive
Follow this procedure only if you are replacing an existing
hard drive. If you are adding a new hard drive, go to
"Configuring the New Drive" on page 9.
Warning Avoid exposure to dangerous electrical
voltages and moving parts by turning off your
computer and unplugging the power cord
and modem cable before opening the case.
Tips & Tricks See the documentation that came with your
computer for more information about your
specific computer case.
Tips & Tricks If you are replacing a drive, make note of the
jumper settings on the old drive so you can
configure the new drive the same way.
2
5