Using The System Restoration Kit - Gateway DX4320 Hardware Installation Manual

Chapter 5: Setting Up the New Drive Automatically

Using the System Restoration Kit

If you want to customize the hard drive's configuration, do not set up the hard
drive automatically. Instead, go to "Partitioning the new drive" on page 41 and
"Formatting the New Drive" on page 50.
To set up a hard drive automatically using the System Restoration Kit :
1
Insert Disc 2 of the System Restoration Kit into your CD or DVD drive.
2
Restart your computer.
3
Select
opens.
4
If a message tells you that you must disable Gateway GoBack, press D. A
warning tells you that Gateway GoBack will be disabled. Press D again.
Gateway GoBack is disabled and your computer restarts.
5
Follow the on-screen instructions. The on-screen instructions step you
through the operating system and device drivers installation.
38
. The Gateway System Restoration Startup Menu
2. Install Windows
www.gateway.com