Setting Up The New Drive Manually; Partitioning The New Drive - Gateway DX4320 Hardware Installation Manual

Setting up the

Partitioning the new drive

Follow the instructions in this chapter only if you want to
manually customize the partitions on your new hard drive.
If you are not sure which operating system your computer
uses, right-click the
Desktop or the Start menu), then click
and version of your operating system are listed on the
General tab of the System Properties dialog box.
Complete these three procedures, in sequence, to partition
the hard drive:
1
Determine which file system to use.
2
Create a primary partition.
3
Create the extended partition.
New Drive
Manually
icon (located on the
My Computer
Properties
6
. The name
41