•
If using ATA drives, verify the master/slave settings are set correctly. Refer to your
drive documentation for details on setting the master/slave settings.
•
If using a RAID configuration with SCSI or SATA drives, make sure the RAID card
is installed correctly.
Bootable CD-ROM Disk Is Not Detected
Check the following:
•
Make sure the BIOS is configured to allow the CD-ROM to be the first bootable
device.
LED Information
The Intel
system. The following table lists these LEDs and provides a description of their use.
LED Name
ID
Aid in server
identification from the
back panel
System Fault
Visible fault warning
Disk Activity
Front panel
POST Code
Display boot 80 POST
1-8
code
5-V Standby
Identify 5-V standby
power on state
Power LED
Identify the power state
of the system
64
®
Server Board S3420GP includes LEDs that can aid in troubleshooting your
Table 11. LED Information
Function
Location
Front panel
and board rear
left corner
Front panel
and board rear
left corner
Front panel
and board left
side
Left rear of
board
Front left
board
Front panel
LED Color
Blue
Press ID LED button or use
Server Management software
to turn the LED on and off.
•
Green or
On = No Fault
Amber
•
Green Blink = degraded
•
Amber = non-critical
Green
Blinking = Activity. No action
required.
Each LED can
See the POST code table.
be Off, Green,
Amber, or Red
Amber
On = 5-V standby power on
•
Green
Off = Power is off (off or
S5)
•
On = Power on or S0)
•
Slow Blink = Low power
state (S1 - S3)
Intel® Server Board S3420GPRX User Guide
Notes