Primary/Secondary Ide Master/Slave Submenus - Intel D815EEA2 - Desktop Board Motherboard Product Manual

Primary/Secondary IDE Master/Slave Submenus

To access these submenus, select Advanced on the menu bar, then IDE Configuration, and then the
master or slave to be configured.
Maintenance
There are four IDE submenus: primary master, primary slave, secondary master, and secondary
slave. Table 18 shows the format of the IDE submenus. For brevity, only one example is shown.
Table 18. Primary/Secondary IDE Master/Slave Submenus
Feature
Drive Installed
Type
Maximum Capacity
LBA Mode Control
Multi-Sector Transfers
PIO Mode
(Note)
Note: These configuration options appear only if an IDE device is installed.
Main Advanced
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Diskette Configuration
Event Log Configuration
Video Configuration
Options
None
• None
• User
• Auto (default)
• CD-ROM
• ATAPI Removable
• Other ATAPI
• IDE Removable
None
• Disabled
• Enabled (default)
• Disabled
• 2 Sectors
• 4 Sectors
• 8 Sectors
• 16 Sectors (default)
• Auto (default)
• 0
• 1
• 2
• 3
• 4
Security Power
Description
Displays the type of drive installed.
Specifies the IDE configuration mode for IDE devices.
User allows capabilities to be changed.
Auto fills-in capabilities from ATA/ATAPI device.
Displays the capacity of the drive.
Enables or disables LBA mode control.
Specifies number of sectors per block for transfers from
the hard disk drive to memory.
Check the hard disk drive's specifications for optimum
setting.
Specifies the PIO mode.
Using the Setup Program
Boot Exit
continued
67