Peripheral Configuration Submenu - Intel D815EEA2 - Desktop Board Motherboard Product Manual

Intel Desktop Boards D815EEA2, D815EPEA2, D815EFV, and D815EPFV Product Guide

Peripheral Configuration Submenu

To access this submenu, select Advanced on the menu bar, then Peripheral Configuration.
Maintenance
The submenu represented in Table 16 is used for configuring computer peripherals.
Table 16.

Peripheral Configuration Submenu

Feature
Serial Port A
Base I/O Address
(This feature is present
only when Serial Port A
is set to Enabled)
Interrupt
(This feature is present
only when Serial Port A
is set to Enabled)
Serial Port B
Base I/O Address
(This feature is present
only when Serial Port B
is set to Enabled)
Interrupt
(This feature is present
only when Serial Port B
is set to Enabled)
64
Main Advanced
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
Video Configuration
Options Description
• Disabled
Configures serial port A.
• Enabled
Auto assigns the first free COM port, normally COM1, the
address 3F8h, and the interrupt IRQ4.
• Auto (default)
An * (asterisk) displayed next to an address indicates a
conflict with another device.
• 3F8 (default)
Specifies the base I/O address for serial port A, if serial port
A is Enabled.
• 2F8
• 3E8
• 2E8
• IRQ 3
Specifies the interrupt for serial port A, if serial port A is
Enabled.
• IRQ 4 (default)
• Disabled
Configures serial port B.
• Enabled
Auto assigns the first free COM port, normally COM2, the
address 2F8h, and the interrupt IRQ3.
• Auto (default)
An * (asterisk) displayed next to an address indicates a
conflict with another device.
• 2F8 (default)
Specifies the base I/O address for serial port B.
• 3E8
• 2E8
• IRQ 3 (default)
Specifies the interrupt for serial port B.
• IRQ 4
Security Power Boot Exit
continued