Primary/Secondary Ide Master/Slave Submenus - Intel D850EMD2 Product Manual

Primary/Secondary IDE Master/Slave Submenus

Maintenance
There are four IDE submenus: Primary master, primary slave, secondary master, and secondary
slave. Table 16 shows the format of these IDE submenus. For brevity, only one example is
shown.
Table 16.

Primary/Secondary IDE Master/Slave Submenus

Feature
Drive Installed
Type
Maximum Capacity
LBA Mode Control
Multi-sector Transfers
PIO Mode
Main
Advanced
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
Video Configuration
Options
None
• None
• User
• Auto (default)
• CD-ROM
• ATAPI Removable
• Other ATAPI
• IDE Removable
None
• Disabled
• Enabled (default)
• Disabled
• 2 Sectors
• 4 Sectors
• 8 Sectors
• 16 Sectors (default)
None
Security Power
➜
Description
Displays the type of drive installed.
Specifies the IDE configuration mode for IDE devices.
User allows capabilities to be changed.
Auto fills-in capabilities from ATA/ATAPI device.
Displays the capacity of the drive.
Enables or disables LBA mode control.
Specifies the number of sectors per block for transfers
from the hard disk drive to memory.
Check the hard disk drive's specifications for optimum
setting.
Specifies the PIO mode (these configuration options
appear only if an IDE device is installed).
• 0
• 1
• 2
• 3
• 4
Using the Setup Program
Boot Exit
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
continued
49