Quick Setup Wizard (Fax Setup) - Kyocera TASKalfa 8000i Operation Manual

Quick Setup Wizard (Fax Setup)

In quick setup mode, a wizard is used to configure the following settings Be sure to complete the settings before
using the fax system.
Fax setup items
Step
1.Dialing/RX Dialing Mode(Port 1)
Mode Dialing Mode(Port 2)
Reception Mode
Auto (DRD)
2.Local FAX Local FAX Name(Port 1)
info. Local FAX Name(Port 2)
Local FAX Number(Port 1)
Local FAX Number(Port 2)
Local FAX ID
TTI
3.Sound FAX Speaker Volume
Volume
FAX Monitor Volume
4.Rings Rings(Normal)
Rings(TAD)
Rings(FAX/TEL)
5.Output Paper Output (Port 1)
Paper Output (Port 2)
Reduced RX Size
6.Redial Retry Times
NOTE:
The settings can be changed in the system menu.
Setting item Description
Select the dialing mode according to the line
type.
Select the reception mode.
Select the reception pattern.
Register the local fax name printed on the fax
on the receiving system.
Enter the local fax number to be printed on the
fax on the receiving system.
Enter the local fax ID. The local fax ID can limit
other parties with which you can communicate.
Enter the four-digit local FAX ID number.
Select whether or not to print the local fax
information on the fax on the receiving system.
Set the volume when pressing [On Hook].
Speaker Volume: Volume of the built-in
speaker when the line is connected by
pressing [On Hook].
Set the monitor volume.
Monitor Volume: Volume of the built-in speaker
when the line is connected without pressing
[On Hook] such as in memory transmission.
Set number of times to let phone ring before
answering a call.
Set number of times to let phone ring before
switching to the answering machine.
Set number of times to let phone ring before
switching the FAX and the phone.
Select paper output for the received FAX.
Reduces the received FAX size before printing
if the size is larger than the current paper size.
Set the number of redials.
2-2
Preparation Before Use
Reference
Page
6-2
6-14
6-19
6-4
6-5
6-5
6-3
6-12
6-12
6-11
6-9
6-11
6-39
6-34
6-13