Machine - Kyocera TASKalfa 8000i Operation Manual

Machine

This chapter explains the names of parts when the machine is used as a fax machine.
For the parts required when functions other than FAX are used, refer to the machine's Operation Guide.
5
4
6
* The machine may differ from the above illustration depending on the type of your machine.
1
2
3
4
5
6
IMPORTANT: You cannot receive a fax when the main power switch is turned off. To receive faxes with the
power turned off, press the Power key on the operation panel.
Operation panel Perform the fax operation with this panel.
Main power Set this switch to the ON (|) side when
switch performing the fax or copier operation. The
touch panel lights to enable operation.
MP (Multi Set the paper in this tray when using a type of
Purpose) tray paper other than the cassette (e.g., when
using special paper).
LINE connector Connect the modular cord for the telephone
(L1) line to this connector. This connector is Port 1.
LINE connector If you install 2 optional FAX Kits (Dual FAX
(L2) option), you can use Port 2. Connect the
modular cord for the telephone line to this
connector.
TEL connector When using a commercially available
(T1) telephone set, connect the modular cord to
this connector.
1
1-4
Part Names and Functions
3
2