26 (TIME METER) – These indicators will detail the current Minutes, Seconds, and Frames. The meter will display either the elapse, total, or
remaining time of a track or the entire disc. The display time will depend on the selected time function. The selected time function will be
displayed above the TIME METER as either TOTAL REMAINING, Remaining Track Time or Elapsed Track Name.
27 (Time Bar Indicator) – This bar visually details the time defined in the Time Meter (26). As with the Time Meter (26), this bar is also dependent
on the selected time function Remain, Elapsed, or Total Remain. The bar will begin to flash when 15 seconds of a track remain and will begin to
rapidly flash when three seconds of a track remain. The flashing bar is a great visual reminder if a track is about to end. The flashing bar will
function regardless of which time mode the unit is in.
28 (BPM Meter) – The Meter will display the BPM's of the current track.
29 (Pitch Meter) – This meter displays the pitch percentage being applied to playback by the Pitch Slider (8). If the meter reads zero regardless of
the Pitch Slider's (8) position, the Pitch (10) function is not activated.
30 (TEMPO LOCK) –
This will indicate the Tempo Lock function is active.
31 (LOOP/Reloop) – The LOOP indicator will appear when a loop is ready to be engaged. The RELOOP indicator will flash when a loop is engaged.
32 (Autocue) – This will indicate if the Auto Cue is on or off. Press and hold the SGL/CTN (6) for 1 sec. to turn the Auto Cue function on and off.
The unit's Auto Cue function will automatically set the cue point at the beginning of each track.
33 (Character Display) – This will display the name of the track and/or folder when either a CD with text information or an MP3 disc with
compatible ID3 tags is loaded into the unit.
34 (Total/Remain/Elapsed) – When TOTAL REMAIN is indicated in the LCD Display (7) the time meter will show the total disc remaining time.
When REMAIN is indicated the time meter will show the current track's remaining time. When ELAPSED is indicated the time meter will show the
current track's elapsed time.
35 (REPEAT INDICATOR) – This indicates the unit is in repeat play mode; the unit will continue to play all tracks in a selected folder until the mode
is deactivated. To activate REPEAT mode, press the FOLDER BUTTON (14) for at least 2 seconds to activate and deactivate.
©American Audio® ‐ www.americanaudio.eu
UCD‐100™
User Manual Page 30