American Audio UCD-100 User Manual page 27

14 (FOLDER/TRACK BUTTON & FOLDER/TRACK KNOB) – This button is used to toggle the FOLDER/TRACK KNOB between folder and track search.
When the LED of the FOLDER BUTTON is lit, the player is in search mode. When the unit is in track search mode, turn the knob clockwise to search
forward, and counter‐clockwise to search backwards. If you press the knob in and turn it while in track mode, you can skip ahead 10 tracks.
Example: if you are at Track #1, pressing the knob and turning it clockwise will skip you to #11. If you press the knob and turn it clockwise again, it
will skip to #21. there are not that many tracks, it will go back to #1.
Hold the button down for at least 2 seconds to activate and deactivate the REPEAT function:
• REPEAT ON: All the track in the current folder will play track by track until the repeat function is deactivated.
• REPEAT OFF: All the tracks in the device will play in the normal mode.
• SINGLE REPEAT: The current playing track will play continuously.
15 (PLAY/PAUSE Button) – Each press of the PLAY/PAUSE Button causes the operation to change from play to pause or from pause to play. While
in play mode the green play button LED will glow, and while in pause mode the green play LED will flash.
16 (CUE) – Pressing the CUE button during playback immediately pauses playback and returns the track to the last set cue point (see setting a CUE
POINT).
17 (IN, OUT, & RELOOP)
• IN BUTTON – "cue on the fly" ‐ This function allows you to set a CUE POINT without music interruption ("on the fly"). This button also sets
the starting point of a loop.
• OUT BUTTON – This button is used to set the ending point of a loop. A loop is started by pressing the IN BUTTON, pressing the OUT BUTTON
sets the loop ending point. The loop will continue to play until the OUT BUTTON is pressed once again.
• RELOOP BUTTON – If a LOOP has been made, but the CD Player is not actively in LOOP mode (a loop is not playing), pressing the RELOOP
button will instantly reactivate the LOOP mode. To exit the loop, press the LOOP OUT BUTTON.
©American Audio® ‐ www.americanaudio.eu UCD‐100™ User Manual Page 27