• Warranty Card
I
U
NSTALLING THE
NITS
• The UCD‐100 is designed to placed on a flat level surface or installed into a standard 19" rack mount case or enclosure. When mounting the
UCD‐100 in a 19" rack be sure to support the unit by all four screw slots on the face of the unit.
• Be sure the player is mounted in a well ventilated area where it will not be exposed to direct sunlight, high temperatures, or high humidity.
• Try to place the unit as far as possible from TV's and tuners, as the unit may cause undesirable inter‐ ference with such devices.
C
ONNECTIONS
• Be sure the power is disconnected.
• Connect the included RCA cable from your UCD‐100 outputs to the inputs on your mixer.
• Use the Digital Output to connect to MiniDisc, DATmachines, or other device that accepts digital inputs.
CAUTION
To avoid severe damage to the unit, be sure
the power is off when making connections to
the unit.
©American Audio® ‐ www.americanaudio.eu
CAUTION
The player will work normally when the main unit is
mounted with the front panel within 15 degrees of the
vertical plane If the unit is tilted excessively, disks may
not be loaded or unloaded properly.
UCD‐100™
User Manual Page 23