Configuration Jumpers
Jumper Name
J1A2: BMC Force Update
®
(Intel
Server Board
S3420GPLX and
S3420GPLC)
J1F2: Password Clear
J1F5: CMOS Clear
J1F3: BIOS Recovery
Intel® Server Board S3420GP User Guide
Default
2
Enabled
3
Default
2
Enabled
3
Default
2
Recover
3
Default
2
Password
Clear
3
Default
2
CLEAR
CMOS
3
Pins
1-2
BMC Firmware Force Update Mode — Disabled (Default)
2-3
BMC Firmware Force Update Mode — Enabled
1-2
These pins should have a jumper in place for normal system
operation. (Default)
2-3
If these pins are jumpered, administrator and user passwords will
be cleared on the next reset.
NOTE: These pins should not be jumpered for normal operation.
1-2
These pins should have a jumper in place for normal system
operation. (Default)
2-3
If these pins are jumpered, the CMOS settings are cleared on the
next reset.
NOTE: These pins should not be jumpered for normal operation.
1-2
These pins should have a jumper in place for normal system
operation. (Default)
2-3
The main system BIOS will not boot with these pins jumpered.
NOTE: The system will boot from EFI-bootable recovery media
What will occur during a system reset..
with a recovery BIOS image.
23