Continuing With The Rack Installation Process - HP D5970A - NetServer - LCII Guía Del Usuario

Chapter 8
1. Position the Bezel in front of the HP Netserver LP 1000r as shown in
Figure 8-7.
2. Push in on the bottom to engage the pins, allowing it to rotate up.
3. Push the bezel in at the top to engage the spring latches.
The spring latches should click when engaged.

Continuing with the Rack Installation Process

After you install the HP Netserver in the rack, refer to the white paper, located on
the HP web site for high-density rack configurations, to continue the process of
installing and configuring the rack system. The white paper is titled
HP Netserver High Density Rack Solutions Overview (LP 1000r and LP 2000r).
82
Rack Mounting the HP Netserver (4-Post)
Figure 8-7. Attaching the Bezel
Pins
Spring
Latches (2)