Menu Bar - HP D5970A - NetServer - LCII Guía Del Usuario

Chapter 10

Menu Bar

The Setup Utility provides a menu bar with several menu selections. The menu
bar choices are:
User Preferences - Use this menu option to set the Netserver time, date
and keyboard functions.
Security - Use this menu option to set Power-on password protections and
hardware security options. Two choices are available under Security:
Power On Password - Use this option to set the power-on password,
which will require a password to enter the Setup Utility or complete the
boot process.
Hardware Security - Use the options under this head to enable or
disable writing to flexible disk connected to the embedded controller.
Also found here are switches for allowing booting from the flexible
disk drive, hard disk drive, and CD-ROM.
Configuration - Use this menu option to configure I/O ports, I/O
addressing, interrupts, PCI slot masters, IRQ interrupt locking, and boot
device ordering. These menu selections also provide access to enable/
disable specific options or features, such as the Alert-on-LAN 2 feature.
Integrated I/O Port - Configure ports for serial and parallel, assign base
addresses and interrupts, pointing devices (mouse), and console
redirection for remote control.
Flexible Disk Drive - Enable or disable the flexible disk drive
controller.
CPU and Memory - Enable or disable memory cache, memory hole,
and processor serial number.
IDE Devices - Set primary master/slave, secondary master/slave
relationships on IDE devices, and set the local bus IDE adapter.
PCI Slot Devices - Set a PCI slot as master and PCI IRQ locking. The
BIOS warns of conflicts.
Boot Device Ordering - Set the boot order, including bootable boards.
Embedded LAN Controllers - Enable or disable the embedded LAN
controllers and the available features. The Alert-on-LAN 2 (AOL 2)
and Wake-on-LAN features are enabled/disabled under the embedded
LAN A submenu.
90
Configuring the HP Netserver