HP D5970A - NetServer - LCII Guía Del Usuario page 31

Chapter 3
2. Disconnect the SCSI cable end connected to the SCSI A cable connection
on the system board. See Figures 3-6 and 3-7.
3. Unfold the cable and connect it to the SCSI connector on the HP NetRAID
Controller board before installing the board into the Netserver.
Disconnect
SCSI A end of
Cable.
SCSI
Connector
SCSI
Backplane
Board
Figure 3-6. SCSI Backplane Board
SCSI Backplane Board
Figure 3-7. Disconnecting SCSI A Cable
Installing Mass Storage Devices
Leave SCSI
cable connected here.
25