Command Reference; Xoa Print Quality Control - Lexmark T656 User Manual

10 Command Reference

10.1 XOA Print Quality Control

The Execute Order Any State (XOA) Print Quality Control command specifies the print quality at which
jobs will be printed. Specifying lower print quality levels can save toner. The following table gives the
Quality Level value range.
The processing of this command only takes effect when the Toner Saver option in the IPDS MENU is
set to Host Controlled. See Toner Saver on page 22 for more information.
Print Quality Control Quality Level Values
Quality Level Description
(Byte 2 Value)
X'01' – X'55' Lowest print quality. Best toner saving. The result corresponds to the printer
value for Toner Darkness with an additional greyscaling on mono printers and a
color intensity reduction on color printers of all page elements that effectively
reduces the toner applied to each page. The lower the Toner Darkness setting, the
lighter the printed result.
X'56' – X'AA' Use the operator panel setting for the value specified in the printer Toner
X'AB' – X'FE' Darkness menu.
X'FF'
The print quality setting is saved as part of IPDS resources when the printer and host settings are set
correctly to allow resources to be saved in the printer.
The following Negative Acknowledgment is returned by printers that support the XOA Print Quality
Control command.
Exception
X'0292..02'
74
Description
Invalid XOA Print Quality Control parameter. An invalid
quality level value of X'00' was received.
Action Code
X'01'