Codepage Version; Default Fgid; Default Cpi; Printable Area - Lexmark T656 User Manual

Note 2: The Euro symbol is supported in code pages 1140-1159, 1153-1158 and in code pages whose text
description includes the designation Eur, such as Arabic Eur 420.

3.3.7 Codepage Version

This option determines which version of a code page is used. Some of the code pages are available in two
versions. Some characters differ between the two versions of the same code page. If characters print
differently than those entered on the keyboard, check the code page version.
Version 1* Use version 1 of appropriate code pages.
Version 0 Use version 0 of appropriate code pages.

3.3.8 DEFAULT FGID

Selects the default Font Global Identifier (FGID) to be used by the IPDS emulation when the host does
not send an FGID at the start of a job.
Select an FGID for the emulation chosen in the IPDS Emulation option. FGIDs in the appendix on "Font
and Code Page Information", starting on page 83 are available in the operator panel.
Option name
Resident FGID
3812/3816 FGID

3.3.9 Default CPI

Selects the default characters per inch (CPI) to be used by the IPDS emulation when the host does not
send a CPI value at the start of a job. The option does not apply to the fixed pitch fonts.
10.0* Default CPI. The range is 5.0 to 30.9.

3.3.10 Printable Area

This option defines the printable area on the page and how clipping is performed. Top, bottom, and side
margins for your print jobs are set through your print application.
Important: Printing within 4.2 mm (.167 in) of the media edge may result in poor print quality. Printing
within 4.2 mm (.167 in) of the media edge may also result in printing off the edge of the media. Continual
printing within 4.2 mm (.167 in) of the media edge is not recommended. It can result in paper jams due to
toner contamination of the paper path and toner appearing on the back side of duplex sheets. Toner
contamination of the paper path can make more frequent maintenance necessary.
Whole Page*
Print Page
24
Values
Default FGID is 416*.
When using a CPI value of 10.0 FGID 416 is equal to FGID 11.
Default FGID for 3812/3816 is 11*.
The printable area for the media loaded is reported to the host. Clipping occurs if
data is printed outside the printable area. All four edges will clip.
The printable area for the media loaded is reported to the host. If the logical page is
outside the printable area it is moved down and to the right. The right and bottom
edges will be clipped.