Lexmark W850, X860De, X862De And X864De Optional Standard Finisher; Corner Staple - Lexmark T656 User Manual

5.2.1.2

Lexmark W850, X860de, X862de and X864de Optional Standard Finisher

The optional Standard Finisher supports Corner staple and Dual staple (IPDS Edge stitch). The printer
automatically rotates the text 180 degrees for short-edge fed paper and 90 degrees for long-edge fed
paper. If necessary, reformat your job on the host with a different text orientation to avoid stapled sets
that are hard to read.
Refer to your printer or finisher documentation to determine the finishing support and staple location for
various paper sizes. Finishing functions may not be applied to all paper sizes.
See Lexmark X860de, X862de and X864de MFPs Optional Advanced Finisher Functions (on page 56)
for information on additional functions supported.
The Printer device type must always be *IPDS.
How to specify Printer File parameters is shown below.

5.2.1.2.1 Corner Staple

Parameters in the printer file
Corner staple .........*TOPLEFT, *BOTLEFT, *TOPRIGHT or *DEVD
Drawings of staple placement
*TOPLEFT
*DEVD
*BOTLEFT
*TOPRIGHT
*TOPLEFT
*DEVD
54
TEXT
Text
Text text text
Text is shown with 0
degree rotation
specified in IPDS job
Long-edge fed
paper, leading
edge
Text is shown with
0 degree rotation
specified in IPDS
job
Short-edge fed
paper, leading
edge