Example: Changing A Numerical Setting - Lexmark T656 User Manual
Card for ipds and scs/tne ipds emulation
Hide thumbs
Also See for T656:
- User manual (313 pages) ,
- Technical reference manual (165 pages) ,
- Setup manual (41 pages)
Table of Contents
Advertisement
8. When you are finished, exit by pressing
it several times until Ready appears.
2.2.3 Example: Changing a Numerical Setting
Example: If you select Option Card Menu > IPDS MENU > MARGINS > TRAY1 ADJUST > Top
Margin, you see the following display:
Top Margin
0
You can either use the numeric pad or the navigation buttons
the value. Press
to save the desired value.
When the setting is saved, the display will revert to the previous menu level.
MARGINS
Top Margin
Left Margin
Top Margin Back
Some numerical values contain more than one field. For example, Option Card Menu > IPDS MENU >
EMULATION Default CPI.
Default CPI
10 . 0
The value before the decimal point and the value after the decimal point are set independently of each
other. Use the navigation buttons
marked with
above the field and
Default CPI
10 . 0
to return to the Ready screen. You may need to press
to move between the fields. The currently editable field is
below it.
to decrease a value or
to increase
13
Advertisement
Table of Contents
