NOTE:
on attaching the cabling to get optimum performance.
Refer to the illustration below to connect optical drive cables.
a.
NOTE:
Refer to the illustration below to connect diskette drive cables.
b.
Install the front bezel
4.
Install the access panel
5.
Turn on the workstation.
6.
78
Chapter 7 Removal and replacement procedures
Refer to
Serial and Parallel ATA drive guidelines and features on page 47
Some products use straight cable connectors while others use right angle connectors.
(Front bezel on page
(Access panel on page
62).
61).
for information
ENWW