HP xw3400 - Workstation Technical Reference Manual page 33

HP Backup and Recovery Manager can create the Restore Plus! CD set. This set includes the Restore
Plus! CD, the Operating System CD, and any Supplemental Software CDs.
CAUTION:
initial system setup.
To create the Restore Plus! CD set:
Click Start > HP Backup and Recovery > HP Backup and Recovery Manager to open
1.
the Backup and Recovery Wizard, then click Next.
Select Create factory software recovery CDs or DVDs to recover the system.
2.
Follow the instructions in the wizard.
3.
In addition to allowing you to create the Restore Plus! CD set, HP Backup and Recovery Manager can be
used to back up data and system files to the hard drive, to network drives, or to removable media, such
as CDs, DVDs, or flash media. If data or system files are lost, deleted, or corrupted, Backup and Recovery
Manager allows you to retrieve data or restore the last good system image.
CAUTION:
and data protection. Automatic backups can be scheduled using the HP Backup and Recovery Manager
Wizard. Recovery Points, Entire Drive Backups, and File Backups can be automatically backed up without
user intervention. HP recommends scheduling Recovery Point Backups to provide the most comprehensive
coverage.
NOTE:
If HP Backup and Recovery Manager is preinstalled, the Restore Plus! CD set and the initial
recovery point may be saved to disc as often as necessary, but only a single copy of the Microsoft
Windows CD can be created, due to licensing constraints.
You can access a user manual at Start > HP Backup and Recovery > HP Backup and Recovery
Manager Manual. We suggest that you print this document for easy reference in case of future
emergency.
If Create factory software recovery CDs or DVDs to recover the system is unavailable on
your system, the HP Restore Plus! CD set can be obtained through product support on
http://welcome.hp.com/country/us/en/contact_us.html.
ENWW
The Restore Plus! CD set will not include any system settings or user data created after the
HP recommends that a backup schedule be created immediately to ensure continued system
Initial configuration and deployment 23