Removing The Speaker - HP Visualize J5000 - Workstation Service Handbook

J class workstation
Hide thumbs Also See for Visualize J5000 - Workstation:
Table of Contents

Advertisement

Speaker
Before removing the speaker, perform the following steps:
D
Open the system unit
D
Remove the CPU assembly
D
Disconnect the speaker cable from the CPU board
Push in the speaker retainer clips and lift out the speaker, as shown in Figure 5–30.
Figure 5–30. Removing the Speaker
Push in the Speaker
Retainer Clips
Field Replaceable Units
5–35

Advertisement

Table of Contents
loading

This manual is also suitable for:

9000 j class

Table of Contents