HP Visualize J5000 - Workstation Service Handbook page 81

Messages similar to the following appear:
Verification has started on device (CPU).
Verification has started on device (FPU).
CSTM>Verification of (FPU) has completed.
CSTM>Verification of (CPU) has completed.
4.
Type to return to the
CSTM>
5.
To exit the Support Tools Manager, enter the following:
CSTM> exit
If any tests failed, run Self Test and ISL diagnostics to isolate the problem.
prompt after all test results are reported.
Enter
Troubleshooting 4–31