Led Display Codes - Dds-2 Drive - HP Visualize J5000 - Workstation Service Handbook

3. Repeat the operation you performed when the Media Wear (Caution) signal dis-
played. If the Media Wear (Caution) signal still displays, then the data cassette
should be replaced.
4. If you are performing a backup from disk to tape, discard the data cassette and
back up your files using a new data cassette.
5. If you are performing a restore from tape to disk, complete the restore, then dis-
card the data cassette and back up the files to a new data cassette.
LEDs – DDS-2
The front panel has two colored LEDs: the Tape Light and the Clean/Attention Light.
The Tape Light flashes green to show activity (loading, unloading, reading, and
writing). Steady green means a cartridge is loaded.
The Clean/Attention Light flashes amber to indicate head cleaning is needed or a
cartridge is near the end of its life. Steady amber means a hard fault.
Table 1–3 lists the LED codes and their meanings.
Table 1–3. LED Display Codes – DDS-2 Drive
Tape Clean/ Meaning
Light Attention
Activity – load or unload
Activity – read or write
Cartridge loaded
Any
Cleaning needed
Any
Fault
Key
OFF
Steady Green
Steady Amber
Flashing Green
1/2 sec on, 1/2 sec off
Flashing Amber
1/2 sec on, 1/2 sec off
Fast Flash Green
1/4 sec on, 1/4 sec off
Product Information 1–9