HP Visualize J5000 - Workstation Service Handbook page 112

Screws
Figure 5–25. Removing the System Motherboard
6. Swap the EEPROM from the old system motherboard to the new one.
The EEPROM is located at Reference Designator UH6 on the motherboard. The
third line on the PROM is the LANIC ID. See Figure 5–26 for the location of the
PROM on the system motherboard.
NOTICE:
If the EEPROM is replaced, note the LANIC ID on
the EEPROM being removed and use ss_config to
restore the original LANIC ID. This is crucial for
maintaining the unique SW_ID for the system.
5–30 Field Replaceable Units
Screws