TeemTalk Connection Wizard Settings
Aux Port Settings
Aux Port Settings
Aux Port
The
dialog is displayed by clicking the
Advanced
button in the Connection Wizard
dialog. The options in
this dialog enable you to specify a COM or LPT port for bidirec-
tional output when in any DEC VT mode, ANSI BBS, Sco Console
HP 700-92/96, or IBM 3151 mode.
Configure
Clicking the
button will display a dialog in which you can
specify settings for the COM port. The options in it are described in
the section "Serial Settings" on page 209.
Aux Port Settings
51