Error Messages; Notes About Certificates - Neoware T5730 - Compaq Thin Client User Manual

Error Messages

Notes About
Certificates
encrypted, along with the certificate itself. Please note this is a
security risk as anyone who can acquire a copy of your registry
will be able to use your certificate.
OK
5 Click once you have configured the certificates.
Next
6 Either click
New Connection
7
Login as usual when the telnet login prompt appears.
Could not connect TCP/IP socket.
The most likely cause of this error is that the service is not running
on the server, or the port number is incorrect.
Could not connect SSL socket. Please check that your client
certificate is correct.
This message is returned if the server refuses the SSL connection.
The most likely causes are that the server is expecting a client certif-
icate but none has been specified or the client certificate specified is
invalid for some reason. This error may also be seen if the server is
running an incompatible version of SSL. TeemTalk currently sup-
ports SSL2, SSL3 and TLS.
The server's certificate cannot be verified.
The server's identity certificate was not signed by any of the root
certificates installed in TeemTalk. TeemTalk will not connect to a
host it cannot verify.
Common name does not match host name.
The common name is part of the server's certificate. SSL assumes
this will match the host name given in the
Connection Wizard, or
dialog. If they do not match TeemTalk will not connect to the host.
The SSL Protocol uses three types of certificate:
1
Server certificates. These are always sent by the server to the
client to validate the server's identity. SSL handles them
internally and they are never saved on the client.
in the Connection Wizard, or
dialog.
Connect To
box in the
SSL Connection Settings
Host Connection Settings
Connect
in the
Host Name
box in the
New Connection
77