Initialization Commands
ZModem Startup
ZModem Log File
Name
Display Settings
Window Minimized
on Start-Up
Window
Maximized on
Start-Up
434
Display Settings
Registry Entry: None
Command Line: -ZM
Default Setting: Disabled
This will cause TeemTalk to check incoming data for a remote
ZModem startup sequence then automatically start a file transfer
using the settings specified in the
that the transfer protocol selected in the
will be ignored. Refer to the chapter "File Transfer" on page 383 for
details.
Registry Entry: None
Command Line: -ZDname
Default Setting: None
Nominates a log file name for ZModem file transfer.
Registry Entry: WindowSize = "minimized"
Command Line: -MI
Default Setting: Not applicable
The TeemTalk window is displayed as an icon when it is loaded.
Registry Entry: WindowSize = "maximized"
Command Line: -MA
Default Setting: Not applicable
The TeemTalk window is displayed at the maximum size possible
when it is loaded, while retaining the default number of lines and
columns and including all window elements if enabled (title bar, soft
buttons etc.).
ZModem Parameters
Initiate File Transfer
dialog. Note
dialog