Graphics Mode; Dec Suite Emulation Settings - Neoware T5730 - Compaq Thin Client User Manual

Graphics Mode

DEC Suite Emulation
Settings
WYSE PCTerm
Provides compatibility with software designed for
the PC Term personality supported by Wyse.
Graphics Mode
The option is only available if your version of
TeemTalk supports graphics emulations and the
set to one of the DEC VT, Ansi BBS, AIXTerm, AT 386 or Sco
Console emulations. The setting determines the graphics mode that
will be entered when the host sends graphics commands.
ReGIS
This emulation enables you to run applications written
for the DEC VT340 terminal in ReGIS mode.
Tek4014
This emulation enables you to run applications written
for the Tektronix 4010 and 4014 terminals.
VT640
This emulation enables you to run applications written
for the Retrographics VT640 terminal.
W2119
This emulation enables you to run applications written
for the Westward 2119 terminal.
VT Terminal ID
This option applies to the DEC VT emulations. It specifies what is
reported back to the host in response to a terminal identification
request. (Note that not all features of the specified terminal may be
supported.)
Cursor Moves Right to Left
This option applies to the DEC VT, Ansi BBS, AIXTerm, AT 386
and Sco Console emulations. It enables you change the direction in
which the text cursor moves across the display.
High Function Terminal
This option is displayed when the AIXTerm emulation is selected. It
enables you to switch between HFT (High Function Terminal) mode
(default) and VT100 mode.
TeemTalk Connection Wizard Settings
Emulation
Connection Information
option is
27