Default Definitions; Key String Treatment; Function Indicator; Key String Definition - Neoware T5730 - Compaq Thin Client User Manual

Teemtalk 6.0 for windows user manual
Table of Contents

Advertisement

HP 700-92/96 Emulation

Default Definitions

Key String
Treatment

Function Indicator

Key String
Definition
294
Programming Function Keys & Buttons
While this screen is displayed the f-keys and equivalent buttons have
the functions shown by the buttons at the bottom of the TeemTalk
window, so pressing F4 or the
default key and button definitions to be asserted. The default defini-
tions will take effect when the User Key Definition screen is exited.
Each f-key and button definition displayed in the User Key Defini-
tion screen consists of two lines. The first line begins with the f-key
number followed by space then a one-character attribute field. This
field will contain either an uppercase
indicate the following:
L
The key string is executed locally.
T
The key string is transmitted to the host only.
N
The key string is treated as keyboard-entered data.
The default selection is
the Tab or Shift + Tab keys to move the cursor over the field then
Next Choice
press F2 (
cycle through the options until the one required is displayed.
The remainder of the first line is used to specify what is displayed on
the screen button to indicate its function. The default display shows
the numbers of the f-keys.
The two fields following
that can be displayed on the button. To change the current definition,
use the Tab or Shift + Tab keys to move the cursor into the relevant
field and type in the new definition which can consist of a maximum
of 16 characters, eight characters per field.
The second line of each f-key definition contains the character string
that is to be displayed, executed, and/or transmitted to the host when
the key or button is pressed. The string may contain alphanumeric
characters, control characters, and explicit escape sequence charac-
ters entered when Display Functions mode is enabled by pressing F7
Display Functns
or the
Default Values
L
T
,
or
T
for all f-keys. To change this setting, use
Previous Choice
button) or F3 (
LABEL
represent the upper and lower lines
button.
button will cause the
N
. These characters
button) to

Advertisement

Table of Contents
loading

This manual is also suitable for:

T5735 - compaq thin clientTeemtalk 6.0

Table of Contents