Switching To A Different User - HP T5530 - Compaq Thin Client Administrator's Manual

3. On the System tab, select Automatic Log On so the user does not have to enter a password to
log in to the local machine. You can set up automatic log on for one user per terminal. The default
is no password. You must select Automatic Log On to gain access to the Single Button Log
On check box and the Account list.
4. If you want to lock the terminal when pressing Ctrl+Alt+Delete, select Lock screen when pressing
Ctrl+Alt+Delete. This feature allows users to quickly lock their terminal and prevent unauthorized
access. When the terminal is locked, press
access to the terminal.
5. If you want to activate the single button connect feature, select Single Button Log On. This feature
invokes a dialog box that requires the terminal operator to press Enter or click the Logon button
on the dialog box to log in. If someone other than the auto logon user wants to log onto the terminal,
press Esc
6. From the Account list, select the account that the system will use to log on the terminal operator.
7. Select Enable Reset Hotkey to allow the terminal to be reset to factory defaults (registry and
shortcuts) by pressing and holding
CAUTION:
settings resulting in your monitor becoming unable to display, the only way to recover the client will
be to reflash it.
8. Click OK at the top of the window to save your changes.

Switching to a Different User

To switch to a different user when booting:
1. Press the power button to start the system.
2. Press Esc
3. Log on as the user of your choice.
20 Chapter 3 HP ThinConnect
or Alt+F4.
If you disable the F9 reset function and then change monitors or change display
or Alt+F4 before the automatic logon countdown completes.
Ctrl+Alt+Delete
F9 key during boot.
again to type your password to regain
ENWW