Configuring For Kiosk Mode Using Ce .Net Hp Image Refresh 4.21; Adding A Connection; Setting Terminal To Run In Kiosk Mode; Switching To A Different User - HP t5300 - Thin Client Instructions Manual

Configuring an HP Compaq t5300 or t5500 Thin Client for Kiosk Mode
Configuring for
Kiosk Mode
Using CE .NET
HP Image
Refresh 4.21

Adding a Connection

Setting Terminal to
Run in Kiosk Mode
Switching to a
Different User
The CE .NET 4.21 HP Image Refresh provides a simpler method of selecting Kiosk mode
than the previous image.
To set a terminal to run in Kiosk mode, you must first create a connection:
1. In the HP Connection Administrator window, click the Advanced button to access
the Advanced window.
2. On the Assign Connections tab of the Advanced window, click the Add button
below the list of available connections. This invokes the Choose type dialog box,
which lists the connection types registered with the system that adhere to the
Microsoft Windows CE .NET-based terminal. (The Advanced window closes then re-
opens after the connection is configured.)
3. In the Choose type dialog box, select the type of connection you want to create
and click the OK button. A Wizard or setup dialog for the connection type is
displayed.
4. Follow the on-screen instructions in the Wizard or setup dialog to add the
connection to the list of available connections.
5. To edit the connection, select the connection and click the Edit button. Make the
appropriate changes in the Wizard or setup dialog.
6. To delete the connection, select the connection and click the Delete button. The
connection is deleted from the list of available connections and from the connections
lists for all users.
To set the terminal to run in Kiosk mode:
1. On the HP Connection Administrator window, click the Advanced button.
2. On the Advanced window, click the Global UI tab.
3. On the Global UI tab, select the Auto start Connection Administrator when
logging into Windows check box. This makes the Kiosk mode option
available.
4. Select the Kiosk mode check box. Two more check boxes become available as
options.
5. If you want to hide the task bar, select the Hide connection task bar check box.
6. If you want to hide HP Connection Administrator, select the Hide the User
interface not allowing changes to connection settings check box.
7. Create the necessary ICA or RDP connection.
8. Click the Save button to save your changes, or click the OK button to save your
changes and exit the Advanced window.
9. Reboot the terminal for all changes to take effect.
To switch to a different user when booting, perform the following steps:
3