HP T5530 - Compaq Thin Client Administrator's Manual page 71

Windows ce 6.0 build 6.00.6xx or higher administration

Hide thumbs Also See for T5530 - Compaq Thin Client:

Table of Contents

If you want to add or change SNMP security settings, click the Security tab.

To enable an authentication failure trap, select Enable Authentication Failure Trap.

Select the hosts from which SNMP packets may be accepted. Choose either Accept SNMP

packets from any host or Accept SNMP packets from these hosts.

Click OK after entering all the necessary SNMP information.

ENWW

SNMP

Table of Contents

Show Quick Links

Table of Contents

T5540