Assigning Connections; Designating Connections As Primary Or Secondary - HP T5530 - Compaq Thin Client Administrator's Manual

properly. To configure HP ThinConnect to automatically start up, see
ThinConnect on page
◦
Persistent: Determines whether the system will attempt to reconnect when a connection
fails. Yes indicates the system will automatically attempt to reconnect. Click on the column
value to change the setting.
● OK: Click to save changes and exit the Advanced window.
● Cancel: Click to cancel unsaved changes and exit the Advanced window.
● Apply: Click to save changes.

Assigning Connections

Once you have created a connection, you can assign it to users in the Advanced window.
1. In HP ThinConnect, click Advanced.
2. On the Assign Connections tab, select the appropriate user from the User list.
3. Double-click the connection in the Available connections list, or select the connection and click
the right arrow. The connection is copied to the Connections for [user] list.
4. Click Apply to save the updated list of connections for the user.

Designating Connections as Primary or Secondary

You can designate connections as primary or secondary in the Advanced window. A primary connection
is the first attempted in a group of connections. If a primary connection fails, the system attempts failover
secondary connections in the order they are listed. You can configure more than one primary connection,
each of which can have several secondary connections associated with it. Secondary connections are
optional.
ENWW
17.
Auto Starting HP
Connections 15