Installation - NEC NC900C Installation Manual

LCD Menu

4-3-5. Installation

This menu is the service personnel menu. For the using service personnel menu, refer to "4-1-1. When You Use the Service
Personnel Menu" (page 63).
Option Slot
Configures the devices mounted in slot A. This menu is active in standby mode only.
Slot B is not available in this projector (displays as "Not Available").
IMB
NC-80LB
NC-80DS
No Board
Orientation
Set the projection method (Image Orient) to match the installation conditions of the projector and screen. Furthermore, set the
cooling fan operation (Fan Tilt Setting) to match the installation conditions of the projector.
When you change the installation method, always check that "Fan Tilt Setting" is set correctly (the factory default
NOTE
settings are Image Orient: Normal-F and Fan Tilt Setting: Floor). If "Fan Tilt Setting" is not set correctly, the lamp
may heat up causing it to shatter or become damaged.
Image Orient
Fan Tilt Setting
72
← Select the slot.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Media block (NC-90MS01)
Signal input board (NC-80LB01-B)
Signal input board (NC-80DS01-B)
No device mounted
← Select the item and press the ENTER button to display the menu.
Set the projection method.
Set the cooling method to match the projection method.