Ac Power Work Specifications - NEC NC900C Installation Manual

Setting Up Your Projector

2-3-1. AC Power Work Specifications

AC power supply equipment
Do not use any voltage other than those shown below for the AC power supply connected to the projector.
100–130V AC, single phase, power, 50/60Hz
200–240V AC, single phase, power, 50/60Hz
Breaker
Connect the AC power supply from the power supply equipment of the building to the projector via a breaker. The breaker
capacity will be as follows depending on the power supply voltage.
AC power supply voltage used
100–240V
32
Breaker current capacity
20 A