Table of Contents
Advertisement
Auto Key Lock
Enables or disables Auto Key Lock.
Enable
Disable
3D Connector
Selects the port for 3D video systems used as the control signal input/output for the 3D video system.
If you select "Not Use", the GP I/O port is used as the control signal input/output for the 3D video system. If you select "Use",
the 3D port is used as the signal input for the 3D video system.
Not Use
Use
Unlit Mode
When lamp is unlit, sets whether to shut down the projector or transit to lamp-off state. The default setting is set to "Lamp Off".
For this menu, the new setting is applied immediately when the setting is changed.
Lamp Off
Cooling
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Enables the auto key lock function.
This applies the key lock automatically if you do not perform any operations from the main unit
control panel for 30 seconds after entering the standby state. If you do not perform any
operations for 30 seconds after releasing the key lock, the key lock is applied again.
Disables the auto key lock function.
Although the key lock becomes active after entering the standby state, once you release the key
lock it is not automatically applied.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Does not use the 3D port as the control signal input/output for the 3D video system (uses the GP
I/O port).
Uses the 3D port as the control signal input/output for the 3D video system.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
In case the lamp did not turn on for some reason, the projector will transit to lamp-off state (the
power remains turned on).
In case the lamp did not turn on for some reason, the projector shuts down (powers off). (Before
shutting down, the fan operates for 90 seconds (cool off time).)
LCD Menu
69
Hide quick links:
Advertisement
Table of Contents
