Setup - NEC NC900C Installation Manual

LCD Menu

4-3-4. Setup

This menu is for service personnel. For the procedure to use it, refer to "4-1-1. When You Use the Service Personnel Menu"
(page 63).
Douser Setup
Sets the douser open/close state. Request your dealer/distributor to perform the setting.
Open(Power On)
Lamp On
Title Select
Panel Key Lock
The control buttons on your projector are locked to be inoperative.
Lock
Unlock
When the buttons on the projector's control panel are locked, press the EXIT button on the projector for about 10
NOTE
sec. to unlock them (The key lock setting on the projector becomes Unlock).
68
← Selects the item.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
When set to Enable, the douser opens after the projector starts up.
When set to Enable, the douser opens when the lamp is turned on.
When set to Enable, the douser opens when a title is selected.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Enable a lock on the control buttons on your projector.
Disable the lock on the control buttons.