Checking The Send Status - Kyocera FS-6525MFP Operation Manual

Sending Faxes > Basic transmission procedure
5
Selecting the functions
Ready to send.
FAX
On Hook Chain
0123456789 0123456789
Address Book Ext Address Book
Functions
6
Send Start

Checking the Send Status

1
2
10:10 Set functions such as the scanning density and fax resolution.
Dest. :
Check
Press [Function Menu] to display all the functions.
Direct
Add Dest.
One Touch Key
Favorites
When scanning finishes, transmission starts.
When originals are placed in the document processor
After originals placed in the document processor are scanned and
stored in the memory, the receiving system is dialed.
When originals are placed on the glass surface
After originals placed on the glass surface are scanned and stored in the
memory, the receiving system is dialed.
When continuous scan is set, you can continue with scanning of a
next original after an original on the glass surface has been stored in
memory. Every time one page is scanned, you perform an operation
to allow continued scanning, and after all the originals have been
stored in memory, the receiving system is dialed.
Press the Status/Job Cancel key.
Display the send job status screen.
Status/Job Cancel.
Status
1
Print Job Status
Send Job Status
Store Job Status
Scheduled Job
Pause All
Print Jobs
The list of accepted time, destination, and status are displayed for each job.
For details, refer to Fax transmission functions on page 4-7.
NOTE
For details, refer to Continuous Scan on page 4-14.
10:10
2
1/4
4-3
Status/Job Cancel.
Send Job Status
0005 0123456
Menu Cancel
10:10
Process
1/1
Close