Before Using the Fax Machine > Part Names and Functions
Part Names and Functions
Machine
This chapter explains the names of parts when the machine is used as a fax machine. For the parts required when
functions other than FAX are used, refer to the machine's Operation Guide.
1
1
Operation panel
2
Main power switch
3
LINE connector (L1)
4
TEL connector (T1)
IMPORTANT
You cannot automatically receive a fax when the main power switch is turned off. To
receive faxes with the power turned off, press the Power key on the operation panel.
2
3
4
* The operation panel may differ from the above
illustration depending on the type of your machine.
Perform the fax operation with this panel.
Set this switch to the ON (|) side when performing the fax or
copier operation. The touch panel lights to enable operation.
Connect the modular cord for the telephone line to this
connector.
When using a commercially available telephone set, connect
the modular cord to this connector.
1-2