Basic Transmission Procedure - Kyocera FS-6525MFP Operation Manual

Sending Faxes > Basic transmission procedure

Basic transmission procedure

The basic procedure for using the fax system is explained below.
1
Press the FAX key
2
Place the originals
3
Specifing destination
Ready to send.
FAX
On Hook Chain
Address Book Ext Address Book
Functions
4
Select the transmission method
Ready to send.
FAX
On Hook Chain
0123456789 0123456789
Address Book Ext Address Book
Functions
The base screen for fax appears.
If the touch panel is turned off, press the Energy Saver key or the
Power key and wait for the machine to warm up.
10:10 Specify the transmission destination.
Dest. :
Check
Direct
Recall Add Dest.
One Touch Key
Favorites
There are two transmission methods: memory transmission and direct
10:10
Dest. :
transmission.
Check
Direct
Memory transmission: The original is scanned into memory before
Add Dest.
communication starts. Memory transmission is selected by default.
Direct transmission: The destination is dialed and communication
One Touch Key
starts before the original is scanned.
Favorites
Press [Direct] to change the transmission method to direct
transmission. The key will be highlighted on the touch panel. If the
[Direct] is pressed in the highlighted state, the transmission method will
change to memory transmission.
NOTE
Refer to the machine's Operation Guide for placing originals.
For details, refer to Methods For Entering the Destination on page 3-1.
For details, refer to FAX Direct Transmission on page 4-15.
4-2