Quick Setup Wizard (Fax Setup); Fax Setup Items - Kyocera FS-6525MFP Operation Manual

Before Using the Fax Machine > Quick Setup Wizard (Fax Setup)

Quick Setup Wizard (Fax Setup)

In quick setup mode, a wizard is used to configure the following settings. Be sure to complete the settings before using
the fax system.

Fax setup items

Step
1.Dialing/RX Mode Dialing Mode
Reception Mode
Auto (DRD)
2.Local Fax Info. Local FAX Name
Local FAX Number
Local FAX ID
TTI
3.Sound Volume Speaker Volume
Monitor Volume
4.Rings Normal
Answering Machine
FAX/TEL Switch
5.Output Paper Output
Reduced RX Size
6.Redial Retry Times
NOTE
The settings can be changed in the system menu.
Refer to Default fax settings on page 9-2 or the Operation Guide for the machine.
Setting item
Select the dialing mode according to the line type.
Select the reception mode.
Select the reception pattern.
Register the local fax name printed on the fax on the
receiving system.
Enter the local fax number to be printed on the fax on
the receiving system.
Enter the local fax ID. The local fax ID can limit other
parties with which you can communicate. Enter the
four-digit local FAX ID number.
Select whether or not to print the local fax information
on the fax on the receiving system.
Set the volume when pressing [On Hook].
Speaker Volume: Volume of the built-in speaker when
the line is connected by pressing [On Hook].
Set the monitor volume.
Monitor Volume: Volume of the built-in speaker when
the line is connected without pressing [On Hook] such
as in memory transmission.
Set number of times to let phone ring before answering
a call.
Set number of times to let phone ring before taking over
from the answering machine.
Set number of times to let phone ring before switching
the FAX and the phone.
Select paper output for the received FAX.
Reduces the received FAX size before printing if the
size is larger than the current paper size.
Set the number of redials.
Description
1-7
Reference
Page
9-7
9-8
9-8
9-6
9-6
9-6
9-6
9-5
9-5
9-8
9-8
9-8
9-6
9-7
9-7