For Netware 5.X/6 Novell Distributed Print Service (Ndps) - Konica Minolta magicolor 8650 User Manual

18

For NetWare 5.x/6 Novell Distributed Print Service (NDPS)

0 Before specifying settings for NDPS, check that the NDPS broker and NDPS manager have been
created and loaded.
0 Also, check that the TCP/IP protocol is specified in the NetWare server, the IP address is specified for
this machine, then this machine is running.
1
Log in to NetWare as an administrator from a client computer.
2
Start up NWadmin.
3
Right -click "Organization" or "Organizational unit" container where a printer agent is created, and then
select "NDPS Printer" on the "Create" submenu.
4
In the "NDPS Printer Name" box, enter the "printer name".
5
In the "Printer Agent Source" column, select "Create a New Printer Agent", and then click "Create".
6
Check the printer agent name, and then in the "NDPS Manager Name" box, browse through the NDPS
manager names, and register it.
7
In "Gateway Types", select "Novell Printer Gateway", and then register it.
8
In the "Configure Novell DPS for Printer Agent" window, select "(None)" for the printer type and "Novell
Port Handler" for the port handler type, and then register the settings.
9
In "Connection type", select "Remote (LPR on IP)", and then register it.
10
Enter the IP address set for this machine as the host address, enter "Print" as the printer name, and
then click the "Finish" button to register the settings.
11
The printer driver registration screen appears. Select "None" for each operating system to complete the
registration.
18-8 EDNord - Istedgade 37A - 900 Aalborg - telefon 9633 3500
Appendix
magicolor 8650