Using The Caller Id Service To Reject Calls - Canon 4204B019AA User Manual

> > Sending/Receiving Faxes Using the Operation Panel of the Machine
Advanced Guide
Faxing
Service to Reject Calls

Using the Caller ID Service to Reject Calls

If you subscribe to the Caller ID service, the machine detects the sender's Caller ID. If the sender's ID
does not match the conditions specified in this setting, the machine rejects the phone call or fax
reception from the sender.
Press the FAX button, then press the
1.
The Fax settings screen is displayed.
Use the button to select Reception settings, then press the
2.
Use the button to select Caller rejection, then press the
3.
Use the button to select Subscribed, then press the
4.
You can now perform settings for Caller rejection.
Use the button to select the phone call or fax rejection condition, then press the
5.
button.
OK
Set the conditions below.
Anonymous number
Selects whether to reject a phone call or fax reception from an anonymous number.
Out of area
Selects whether to reject a phone call or fax reception out of the subscribed service area.
Rejected numbers
Selects whether to reject a phone call or fax reception from the numbers registered to Rejected
numbers in Fax reception reject. For details, see
Reject: Rejects the phone call or fax reception matching the condition specified by this setting.
If you select Reject for Rejected numbers, Register rejected no.? is displayed on the LCD. Select
Yes to register a fax/telephone number to reject. For details, see
Accept: Allows the phone call or fax reception matching the condition specified by this setting.
Note
This setting may not be supported depending on the country or region of purchase. Contact your
telephone company to confirm whether it provides this service.
button.
Menu
OK
button.
OK
Rejecting Fax Reception
Rejecting Fax Reception
> Using the Caller ID
button.
OK
button.
.
.
Page top