Table of Contents
Advertisement
Make sure to provide ground line from the ground terminal of the power plug.
Otherwise, electric shocks may result.
Always calculate the total loading of any installed equipment and ensure that the power supply, (sockets or
other outlets) are suitable for the installation. Failure to do so may cause fire or electric shocks due to
overload.
Do not place or store anything on the equipment. If metals, liquid or other objects should get inside the
equipment, fire or electric shocks may result. Also, any heavy items placed on the top of the units may fall
down, resulting in injury or damage.
Secure the equipment to the building. The wall to be attached needs to have strong and rigid construction.
A high position projection system may topple during an earthquake. Human life and property may sustain
great damage if a system topples. Prevent toppling and accidents. Following offers some examples of how to
avoid toppling. Use the most appropriate one for the installation conditions.
CAUTION
Do not block the vent ports of the equipment, or obstruct airflow around the equipment.
When the vent ports are blocked, temperature inside the display will rise and cause fire disaster.
For example, do not use the equipment in the following conditions.
(1) Install the equipment in places with poor ventilation.
(2) Place the equipment facing up, sideways, or upside-down.
(3) Place the equipment on a carpet or bedding.
(4) Cover the equipment with a cloth or curtain.
(5) Place packages around the equipment or lean/place items against the equipment.
(6) Placing the equipment on a table, unstable base or directly against a wall.
for periodic maintenance or inspection.
(7) Do not place the equipment where it may be exposed to dust, oily smoke or steam such as a cooking
area, etc..
(8) Do not place the equipment where it may be exposed to wind and rain.
The screen may drop or fall down due to wind and cause injury. Or rain may result in fire or electric
shocks.
PRECAUTIONS FOR USE AND MAINTENANCE
Request to User
Fragile plastic panel
The P42LSA+/P47LSA+/P42LSB/P47LSB have a plastic screen and even a small crack on the plastic panel
can cause fatal screen damage. Please be careful when handling and always use two people to move or lift
up product. Never drop product from any height.
When discarding this product, please consult to the city disposal division since the back-light fluorescent
lamps contain small amount of mercury, follow the city discard guide.
Precautions on Use
Connection of a grounded cable
Ground the LCD panel in order to prevent electric shock with 3-core power cable. There is greater danger
of electric shock when multiple units are used without ground wire connected.
8
SAFETY PRECAUTIONS FOR USER
Rear access is required
Advertisement
Table of Contents
