Entering To The Adjustment Menu - Toshiba P42LSB Service Manual

WIRELESS REMOTE CONTROL OPERATION

Entering to the adjustment MENU

Arrow mark (red)
"Selected and Highlighted"
Above right shows that [ENTER] or [MENU] button is pressed, Main Setting page appears, a resolution of
the signal is indicated and Input terminal icons. By using [LEFT], [RIGHT] keys, input can be set to the
others, in here below left, Composite is selected and high-lighted. Now, go back by selecting RGB and
[EXIT] from this Input selection.
When [RIGHT] is pressed, the picture below right appears where this DISPLY menu page includes
Brightness/Contrast/Hue/Saturation/Flesh-Tone/Black Level adjustments. Use [ENTER] or [MENU] to
do adjustments. Item selection from these 6 items is done by [UP]/[DOWN] key.
To escape from any adjustment such as Brightness, [EXIT] key is to be pushed.
With this new remote control, some actions to use [ENTER] key, [MENU] also takes place.
When Input selection menu is selected
Once the adjustment item is selected by [UP] or [DOWN] key, press the [LEFT] or [RIGHT] key to make
the value change. Note that these [UP]/[DOWN]/[LEFT]/[RIGHT] keys are center located adjustment key
surrounding [MENU] key inside, refer to the above right picture of the remote control, to make easy to
notice, the keys which are used in this operation are indicated by red color. (actual remote control is not
colored red) Press the [EXIT] key to leave from this mode. In these adjustments, only red colored
keys are used to perform adjustments. Other keys in black colored area, they are different adjustment
OSD, Pro-Adjust area. When using the wireless remote control, the adjusted value will be automatically
saved into memory.
indicates
When [MENU] button is pushed, Display enters Display
Information page as below left, no adjustment functions
placed in here. By using [DOWN] key, below right picture
appears, this is input selection page.
When DISPLAY menu is selected
22