Connecting The Signal Cable - Eizo FlexScan L 461 L461 L461 User Manual

2-2. Connecting the signal cable

• Be sure that the power switches of both the PC and the monitor are OFF.
1.
Plug the signal cable into the DVI-I connector at the rear of the
monitor and the other end of the cable into the video connector on the
PC.
After connecting, secure the connection with the screw-in fasteners.
[Analog Input]
[Digital Input]
• The L461 is not compatible with a Power Macintosh G4/G4 Cube ADC (Apple
Display Connector).
12
2. CABLE CONNECTION
FD-C16 (enclosed)
Macintosh Adapter (Optional)
FD-C04 (Optional)
Video Output Connector
D-Sub mini 15 pin
·Standard graphics board
·Macintosh G3 (Blue & White) / G4
Video Output Connector
D-Sub 15 pin
Macintosh
Video Output Connector
DVI
Digital graphics board