Table of Contents
Advertisement
4.
To set the Output signal range (Dynamic Range) of the signal.
Use the "Range Adjustment".
This controls the level of output signal range to display the whole color gradation
(256 colors). Select the "Range Adjustment" in the "ColorManagement" menu.
[Auto]
Push the Auto adjustment button on the front panel while displaying the "Range
adjustment" menu to automatically adjust the range. The screen blanks for a
moment, and adjusts the color range to display the whole color gradation of the
current output signal.
• Pressing Auto adjustment button while displaying the contrast/brightness
adjustment screen (appeared by pressing the control buttons directly) adjusts the
range automatically.
5.
To set the Contrast of the screen.
Use the "Contrast" adjustment.
This controls the brightness for the each color (red, blue and green) at a same time.
Select "Contrast/Brightness" in the screen menu and adjust by using the right and
left buttons.
6.
To set the Brightness of the screen.
Use the "Brightness" adjustment.
This controls the brightness for the entire screen. The brightness of the entire screen
is controlled by changing the brightness if the backlight.
Select "Contrast/Brightness" in the screen menu and adjust by using the up and
down buttons.
• Directly pressing the control buttons also adjusts the contrast and brightness. Press
the "Enter" button to save and exit the settings after the adjustment.
p.36)
4. ADJUSTMENT
21
Advertisement
Table of Contents
