Hitachi CP-X2 - XGA LCD Projector User Manual page 51

3.2 Utilize "PC-LESS Presentation" –Basic - (Continued)
You can also activate "PC-LESS Presentation" from the Web Remote Control.
1) Save JPEG picture files into root directory in SD Memory Card or USB memory.
Insert SD Memory Card into SD card slot on projector or insert USB memory
into USB STORAGE port on projector (Using a USB storage or Using an SD card
of the User's Manual - Operating Guide).
2) Connecting as network refer to section 2 and start the Web Remote Control.
3) Click [THUMBNAIL] button on the Web Remote Control to change projector
mode to "PC-LESS Presentation". Then thumbnail appears.
To remove the SD card or USB memory,
4) Be sure to perform the REMOVE procedure using the SERVICE item in the
MIU menu (MIU Menu of the User's Manual - Operating Guide). When an error
dialog appears in the procedure, please re-perform the procedure after waiting
for a while.
5) When you remove the SD wireless network card, be sure to turn the projector off.
6) Remove the SD card or USB Memory. For removing the SD card, remove the
SD card slot cover before, and put the cover back after.
Caution
• Do not pull out memory card while file is accessed.
• SDHC(4GB etc) SD Memory Card is not supported. UP to 2GB.
• Some SD Memory Cards and/or USB memories will not work correctly.
• Security USB memory is not supported.
3. How to use Projector software – Basics -
51